Equipment running with MATTEI EMS 200 since 1989 with 64,737 hours!
| • Sandblaster | • Lathe | • Wire EDM |
| • CNC Machines-Mill | • Surface Grinder | • Drilling |
Electric motor replaced after 17 years per LANS Company. “We call LANS Company when we have any issues and they arrive within hours and set-up a portable unit as the issue is resolved. They conduct regular service during our lunch hour to avoid production disruption.” Said John
| Standard Equipment and Features | Manual motor starter with thermal overload |
| 3 phase voltages are 230 and 460vAC | |
| 1 phase voltage (S models) is 230vAC | |
| TEFC motor | |
| Integrated oil cooler | |
| Frame mounted for easy installation | |
| Hydraulically actuated intake valve for precise control of intake air. | |
| Air-cooled - air after cooler with 10º F approach temperature of discharge air. | |
| Integrated high efficiency coalescing oil separator filter. Maximum oil carryover is 2-5 PPM. | |
| Pressure gauge | |
| Oil level sight glass | |
| Intake air filter | |
| Condensate separator with auto-drain | |
| Built in thermostatic bypass valve | |
| Minimum pressure non-return valve | |
Standard Safety Features |
Motor over-current protection |
| High temperature shutdown switch | |
| Safety relief valve | |
| Electrical Controls | Manual motor starter |
| Adjustable thermal overload | |
| Control voltage transformer with fuses | |
| Start and stop buttons | |
| High temperature shutdown |