- PRODUCTS
- SPECIAL APPLICATIONS
- ENERGY SAVING
- SECTORS
- AFTER SALES
- RESOURCES
- OUR COMPANY
- CONTACT US
Equipped with IE3 efficiency class electric motor, Maxima 110 series compressors ensure an energy consumption per m³/min of air among the lowest in their category. The low rotation speed of the air end (only 1.000 rpm at 50 Hz) and the 1:1 direct coupling between the electric motor and the compressor allow energy savings of more than 15% compared to other rotary compressors.
This solution starts the motor progressively, thus drastically reducing the power used during this particular phase. Limiting the absorption means reducing electrical and mechanical stress of the machine and the system, and reducing energy consumption.
A dual speed electric fan that senses heat changes ensures constant internal compressor temperature, by increasing or decreasing the cooling air flow.
Maintenance is limited to changing the oil at scheduled intervals, cleaning or changing the air filter and cleaning the radiator. The absence of rolling bearings contributes significantly to reducing maintenance costs.
These costs are however low because the vanes, rotor and stator have an almost unlimited life if proper maintenance is performed. Over 100,000 hours of operation are guaranteed without the need to replace the compression unit.
The compact design and small footprint allow installation even in confined spaces. Large hinged doors and easily removable panels allow complete accessibility for all maintenance and service operations. The base is equipped with openings that permit easy lifting and handling.
Mattei air compressors are coated with epoxy powders, resistant to both corrosion and scratches. They are also coated inside with abundant soundproofing material.
The 99% efficient filtration system ensures quality compressed air for every application, while the special multi-stage oil separation guarantees a residual oil content in the air of less than 3 mg/m³.
Maxima 110 compressors are equipped with the exclusive Maestro XS electronic controller that makes it possible to control, monitor and program the compressor's operation. The unit can also be controlled remotely via a PC connection.
Model | MAXIMA 110 |
Max. Operating Pressure | 8 bar(g) | 116 psig |
Max. F.A.D. | 23,35 m3/min | 825 cfm |
Sound Pressure Level | 70 dB(A) |
Power | 110 kW | 150 hp |
Voltage | 400 V |
Frequency | 50 Hz |
Phases | 3 |
Length | 2350 mm | 93 inch |
Width | 1440 mm | 57 inch |
Height | 1980 mm | 78 inch |
Weight | 2840 kg | 6248 Ibs |
Model | MAXIMA 110 |
Max. Operating Pressure | 8 bar(g) | 116 psig |
Max. F.A.D. | 24 m3/min | 847 cfm |
Sound Pressure Level | 72 dB(A) |
Power | 110 kW | 150 hp |
Voltage | 460 V |
Frequency | 60 Hz |
Phases | 3 |
Length | 2350 mm | 93 inch |
Width | 1440 mm | 57 inch |
Height | 1980 mm | 78 inch |
Weight | 2840 kg | 6248 Ibs |
They remove impurities, contamination and condensation to deliver the highest quality compressed air.
They allow to recover up to 80% of the heat energy generated by the production of compressed air.
Mattei compressors are used by the Bossini Mario company, based in Brescia - Lombardy, to supply the compressed air needed for a production characterized by intense and continuous working cycles.
Since the 90s the Mattei compressors have accompanied Siderinox in the production of stainless steel tubes, supplying the compressed air required for all automation operations.
Mattei MAXIMA series compressors in combination with nitrogen generators for the prevention of fires in refrigerator cells.
Mattei offers a wide range of vane compressor models that perfectly meet the specific needs of the transport industry.
The reliability of Mattei compressors, the high quality standards of the delivered compressed air and the compliance with the industry regulations, make them ideal to be used in the healthcare and pharmaceutical industry.
Reduced operating costs, environmental sustainability and extreme purity of the air supplied make Mattei compressors suitable for all processes in the food industry.