English | International
T4_Pagina prodotto_BLADE 8-12

BLADE 8-12

Mattei Blade 8-12 series direct coupling air compressors are easy to handle, robust and versatile, and are the perfect solution for small and medium-sized companies and small craft businesses.
Flow rate from 0.99 to 1.70 m³/min.
Powers of 7.5 kW, 11 kW.

 

Download Catalogue

BENEFITS

Energy Savings

Equipped with high efficiency IE3 electric motors (IE4 option also available).
The low rotation speed of the air end and the 1:1 direct coupling between the electric motor and the compressor ensure energy savings of more than 15% compared to other rotary compressors.

Simple, Economical Maintenance

The Blade series requires minimum maintenance, the few operations required are facilitated by proper kits specifically designed to speed up the operations. Maintenance costs are low because the vanes, rotor and stator have an almost unlimited life if proper maintenance is performed. Over 100,000 hours of operation are guaranteed without the need to replace the compression unit.

Enhanced Cooling

Blade 8-12 compressors are equipped with electric fan with integrated inverter. Cooling fan rotation speed adapts to the working and environmental conditions, optimising performance and allowing a safe operation up to an ambient temperature of 46°C. 

Suction and Non-return Valve

When the air demand interrupts, the suction and non-return valve allows the compressor to release internal pressure and run with no load. This minimises energy consumption, without the need to stop the compressor. The number of stops and subsequent start-ups is therefore reduced, to the benefit of the service life of compressor and electric motor.

Quality Compressed Air

The special multi-stage air-oil separation allows achieving a top air quality with very low oil residues. The integrated oil separation system ensures a content of residual oil lower than 3 mg/m³.

Soft Start

This solution starts the motor progressively, thus drastically reducing the power used during this particular phase.

Electronic Control

Blade 8-12 series compressors are equipped with a Maestro XB electronic controller, whose graphic display allows constantly monitoring oil temperature, line pressure, and the enable, operation, and load hours.

Versions

  • E version with dryer particularly suitable for applications where dry, moisture-free air is of crucial importance for production.
  • S version on 270l receiver. It may be supplied with certification for AD 2000 pressurised containers. SE version on receiver and dryer.
  • SE version on receiver and dryer
  • Version with IE4 energy-efficiency motor.
  • FEATURES
    Model F.A.D. Sound Pressure Level Nominal Power
      8 bar(g)
    116 psig
    L
    10 bar(g)
    145 psig
    H
    dB(A) kW hp
      m3/min cfm m3/min cfm      
    400V/50HZ/3              
    BLADE 8 1.21 43 0.995 35 65 7.5 10
    BLADE 12 1.70 60 1.37 49 65 11 15
  • DIMENSIONS
    Model Length Width Height Weight
      mm inch mm inch mm inch kg lbs
    400V/50HZ/3                
    BLADE 8 1180 46.5 760 29.9 990 39 270 595
    BLADE 12 1180 46.5 760 29.9 990 39 270 595

RELATED PRODUCTS

T4_Prodotti correlati_TRATTAMENTO ARIA_1
PRODUCTS FOR AIR TREATMENT

They remove impurities, contamination and condensation to deliver the highest quality compressed air.

T4_Prodotti correlati_SUPERVISORI
MASTER CONTROLLERS

Designed to control and monitor compressed air production systems.

T4_Prodotti correlati_RECUPERO ENERGETICO
ENERGY RECOVERY SOLUTIONS

They allow to recover up to 80% of the heat energy generated by the production of compressed air.

Configure your compressor

Find out the compressor that best suits your needs

Configure now

WHAT OUR CUSTOMERS ARE SAYING

THERMO KING

Commercial vans and short-haul trucks dominate today´s urban landscape and represent the fastest growing sector of road traffic in much of Europe. Vans offer more cargo loading-space, easy manoeuvrability and better fuel efficiency, at lower prices than traditional lorries and trucks.

LUXFER GAS CYLINDERS

Mattei makes the heavyweight of light cylinders. Compressed air is vital for industry as it drives many production facilities and pieces of equipment. Its use is responsible for more than 10% of industrial energy consumption, meaning the choice of compressor becomes essential when looking to maintain control of energy costs. The English company Luxfer Gas Cylinders is an excellent example of obtaining efficiency in this regard.

TRIBECA

Mattei compressors have landed at the extremes of the southern hemisphere and contribute to the quality of one of South Africa’s best coffees, those of the TriBeCa Coffee brand. The most appreciated aspect of rotary vane technology is the great reliability, which guarantees quality compressed air during very intensive work cycles and in harsh environmental conditions, such as high temperatures, typical of the coffee roasting process.

SERVING INDUSTRIES

Settori_Trasporto
PEOPLE AND GOODS TRANSPORT INDUSTRY

Mattei offers a wide range of vane compressor models that perfectly meet the specific needs of the transport industry.

Settori_Sanitario
HEALTHCARE AND PHARMACEUTICAL INDUSTRY

The reliability of Mattei compressors, the high quality standards of the delivered compressed air and the compliance with the industry regulations, make them ideal to be used in the healthcare and pharmaceutical industry.

Settori_Alimentare
FOOD INDUSTRY

Reduced operating costs, environmental sustainability and extreme purity of the air supplied make Mattei compressors suitable for all processes in the food industry.

DOWNLOAD

Sticky-CTA_Industry-Benefits
The Industry-Wide Benefits of Rotary Vane Air Compressors
Download Ebook
Sticky-CTA_LCC
The Real Life Cycle Cost of an Air Compressor
Download Ebook