THERMO KING BERLIN TRANSPORTKÄLTE

Commercial vans and short-haul trucks dominate today´s urban landscape and represent the fastest growing sector of road traffic in much of Europe. Vans offer more cargo loading-space, easy manoeuvrability and better fuel efficiency, at lower prices than traditional lorries and trucks.

Drawing on a wealth of commercial vehicle and truck-bodybuilding experience in mobile air conditioning and refrigerating-systems, Thermo King Berlin Transportkälte GmbH recently partnered with Mattei to diversify their product range, picking up on previous experience with engine-mounted mobile air compressors. Having taken the time to get to know one another with an open exchange of mutually beneficial market knowledge, Thermo King has introduced Mattei rotary-vane technology along with tried and tested intra-Group knowhow from Mattei´s 2015 acquisition of the British vehicle-mounted, power solutions provider, Winton Engineering.

 

Thermo-King-sede 3

Every mobile fleet needs a source of power they can rely on. In terms of compressed air, it is still common place to see tow-behind compressors or skid-mounted units installed in the cargo loading-bay of the vehicle - in both cases, alternatives to such technologies are not well known. Jörn-Erik Melzer – Technical Sales at Thermo King´s Customer Centre in Ahrensfelde, near Berlin - “Based on our previous experience with under bonnet, engine mounted compressors we were very familiar with the concept and technology, albeit limited to screw-compressor technology at that time. We knew we were onto a winner but were only scraping the surface of the market potential. We were held back from significant growth by the limitations of the technology we were using.”

“Having been introduced to Mattei Rotary-Vane Technology, seeing the benefits of under-floor installation and experiencing the impressive volume of vehicle conversions managed daily by Winton Engineering, we knew we had found the right partner to make significant inroads into the German market.” – Jörn-Erik Melzer.

 

shutterstock_39386932_thermo_king

Today, 3,5t commercial vans are the heaviest which can be driven on a standard class B European driving license, which in turn makes them the most common mobile workshops on wheels. In the German market, where Thermo King principally operate, the increase in new vehicle registrations has been further enhanced by the abolishment of national service and the elimination of an annual stream of 15.000 heavy-duty driver’s license holders.

With the introduction of Euro 6 emission standards in September 2016 most commercial vehicles have seen an increase in their overall weight by the addition of an AdBlue tank. Even more reason to consider lightweight, underfloor compressed air generation to fully utilize the reduced pay-load now available and optimize loading-bay capacity to the full for workshop tools and equipment.

 

Thermo King Berlin-01

 

As cities prioritize the air quality agenda and introduce greater restrictions to inner-city access,EPA standards will continue to rise and may start to exclude tow-behind diesel-powered compressors entirely.Using an “On-Vehicle” compressed air source and in doing so eliminating anadditional combustion engine, exhaust fumes are reduced, and emissions become managed via the vehicle´s already efficient exhaust system. The installation of a lightweight, quiet, vibration and pulse free compressed air and electricity source also reduces overall mass and strain on the vehicle, saving on wear & tear, cutting maintenance and lifetime costs and improving fuel consumption in general.

“We are very pleased with Mattei compressors and their on-vehicle-packages, consisting of a range of electrical generators, proprietary PTO, controls and ancillary equipment. Above all, their willingness to share knowledge, train our technicians and establish a close, informal but productive partnership with our business is paving the way to success.”

From Vane Magazine 15, September 2019

 

Download PDF

 

SERVING INDUSTRIES

Settori_Trasporto
PEOPLE AND GOODS TRANSPORT INDUSTRY

Mattei offers a wide range of vane compressor models that perfectly meet the specific needs of the transport industry.

Settori_Sanitario
HEALTHCARE AND PHARMACEUTICAL INDUSTRY

The reliability of Mattei compressors, the high quality standards of the delivered compressed air and the compliance with the industry regulations, make them ideal to be used in the healthcare and pharmaceutical industry.

T9_Pagina settori_ALIMENTARE
FOOD INDUSTRY

Reduced operating costs, environmental sustainability and extreme purity of the air supplied make Mattei compressors suitable for all processes in the food industry.

NEWS

Sensore-dellolio_sezione-news-1
ALWAYS ON WITH MATTEI LUBRICANTS

All you need is an oil quality sensor and SIM card within the control panel to have real-time access to the health of your rotary vane compressor from anywhere in the world.

Pelliconi-tappi-News
MATTEI COMPRESSED AIR BLOWING STRONG INTO CHINA

Maxima 75 and Optima 60 compressors are used in China in the production of bottle tops for the Italian brand Pelliconi, where the exclusive Maxi P-26 is produced.

Le-Fonti_sezione-news
MATTEI EXCELLENCE IN ENERGY SAVING

The company was recognised at the Le Fonti Innovation Awards for its commitment to combining both environmental sustainability and energy saving.

WHAT OUR CUSTOMERS ARE SAYING

Testimonials_Luxfer_1
LUXFER GAS CYLINDERS

Compressed air is vital for industry as it drives many production facilities and pieces of equipment. Its use is responsible for more than 10% of industrial energy consumption, meaning the choice of compressor becomes essential when looking to maintain control of energy costs. The English company Luxfer Gas Cylinders is an excellent example of obtaining efficiency in this regard.

T4_Dicono di noi_SPIRAX SARCO
SPIRAX SARCO

All the pneumatic equipment at the French plant of the world leader in steam technology and thermal energy management are powered by Mattei compressors. Reliability and efficiency are the main reasons for the continued success of this partnership.

T4_Dicono di noi_TRIBECA
TRIBECA COFFEE

Mattei compressors have landed at the extremes of the southern hemisphere and contribute to the quality of one of South Africa’s best coffees, those of the TriBeCa Coffee brand.

OFFICIAL SPONSOR OF VERO VOLLEY

VeroVolley-DRIVEN_LOGO