BLADE 8-12

Simple, Economical Maintenance

The Blade series requires minimum maintenance, the few operations required are facilitated by proper kits specifically designed to speed up the operations. Maintenance costs are low because the vanes, rotor and stator have an almost unlimited life if proper maintenance is performed. Over 100,000 hours of operation are guaranteed without the need to replace the compression unit.

Enhanced Cooling

Blade 8-12 compressors are equipped with electric fan with integrated inverter. Cooling fan rotation speed adapts to the working and environmental conditions, optimising performance and allowing a safe operation up to an ambient temperature of 46°C. 

Suction and Non-return Valve

When the air demand interrupts, the suction and non-return valve allows the compressor to release internal pressure and run with no load. This minimises energy consumption, without the need to stop the compressor. The number of stops and subsequent start-ups is therefore reduced, to the benefit of the service life of compressor and electric motor.

Quality Compressed Air

The special multi-stage air-oil separation allows achieving a top air quality with very low oil residues. The integrated oil separation system ensures a content of residual oil lower than 3 mg/m³.

Soft Start

This solution starts the motor progressively, thus drastically reducing the power used during this particular phase.

Electronic Control

Blade 8-12 series compressors are equipped with a Maestro XB electronic controller, whose graphic display allows constantly monitoring oil temperature, line pressure, and the enable, operation, and load hours.

Versions

• E version with dryer particularly suitable for applications where dry, moisture-free air is of crucial importance for production.
• S version on 270l receiver. It may be supplied with certification for AD 2000 pressurised containers. SE version on receiver and dryer.
• SE version on receiver and dryer
• Version with IE4 energy-efficiency motor.